C&P CATALYST, INC.
PRODUCT PRICE LIST
Remit address:
C & P Catalyst, Inc.
PO Box 520984
Tulsa, OK 74152-0984
Return address:
C & P Catalyst, Inc.
4224 S. Pittsburg Ave.
Tulsa, OK 74135-2856
ITEM #
OXIDATION CATALYST COILS
D943
Oxidation Characteristics of Inhibited Mineral Oils (ASTM D943) (ISO 4263) (IP)
D4310
D4310 Determination of the Slugging Tendencies of Inhibited Minerals Oils (ASTM 4310)
*TEST TUBE DEPOSIT IS COMBINED WITH COIL COST BELOW:
Box of 12
$29.00 /each
$348.00 /box
Box of 24
$28.50 /each
$684.00 /box
Box of 48
$28.00 /each
$1,344.00 /box
*As indicated, for D943 and D4310 coils, a deposit of $4.00 per D943 is charged for the special glass test tubes in which the coils are packaged. A credit memo or check (requested by customer), will be issued when the shipping box and test tubes are returned freight prepaid and unbroken.
Return test tubes to: C&P Catalyst, Inc., 4224 S. Pittsburg Ave., Tulsa, OK 74135-2856.
D2112
Oxidation Stability of Inhibited Mineral Insulating Oil by Rotating Pressure Vessel (ASTM 2112)
D2272
Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel (ASTM D2272)
Box of 24
$16.75 /each
$402.00 /box
Box of 48
$16.25 /each
$780.00 /box
*If the jars and lids are returned to us, freight prepaid (in good clean condition), a credit memo or check (requested by customer), $0.75 credit per jar will be issued on next order of D2272 placed.
D2440
Oxidation Stability of Inhibited Mineral Insulating Oil (ASTM 2440) (IP306) (IP307)
Packaged two coils per 4 oz. jar.
$6.00 per coil – Minimum order of $120.00 = (10 jars)
D2070
Thermal Stability of Hydraulic Oils:
Copper test rods are to be UNS C11000, 99.9% pure electrolytic tough pitch copper, 6.35 mm in diameter by 7.6 cm in length (0.25 by 3.0 in.).
$12.00 per Copper Rod
Steel test rods are to be AISI W-1 1% carbon steel, 6.35 mm in diameter, 7.6 cm in length (0.25 by 3.0 in.).
$9.00 per Steel Rod
D4871
Universal Oxidation Test for Hydraulic Fluids and Turbine Oils using ASTM D4871
D5846
Universal Oxidation/Thermal Stability Test Apparatus (D5846) (UOT). Packaged two coils per
8 oz. jar.
$12.00 per coil-Minimum order of $96.00 = (4 jars)
IEC 61125A
$11.00 per coil packaged 2 coils per jar.
$11.50 per coil if packaged 1 coil per jar. 5cm long.
IEC 61125 B&C
“NORMATIVE METHOD”
$11.00 per coil packaged 2 coils per jar.
$11.50 per coil packaged 1 coil per jar.
ITEM #
COPPER & SILVER STRIP CORROSION COUPONS READY FOR IMMEDIATE USE
The copper used in the D130 / IP154 copper corrosion strips meets material specifications set by Committee D02.05.0C on Color and Reactivity. Strips are polished as specified in the respective method and packaged in individual envelopes, then placed in jars and sealed in an inert atmosphere ready for immediate use.
*Copper strips are packaged ten per jar. If the jars and lids are returned freight prepaid a $0.75 credit per jar will be issued. **Please note: Clean empty jars and lids when returning.
Return jars & lids to: C&P Catalyst, Inc., 4224 S. Pittsburg Ave., Tulsa, OK 74135-2856.
ASTM D130 /IP154
Detection of Copper Corrosion from Petroleum Products by the Copper Strip
Tarnish Test.
ASTM D40
Detection of Copper Corrosion from Lubricating Grease
Copper Strip is 12.5mm (1/2″) wide x 3.0mm (1/8″) thick X 75mm (3″) long
$7.25 /each
– NEW strips polished for immediate use
$5.25 /each
– Your used strips (reconditioned) for immediate use
ASTM D1838
Copper strip corrosion from liquified Petroleum Gases
Copper strip is 12.5mm (1/2″) wide x 3.0mm (1/8″) thick X 75mm (3″) long with 1/8″ hole at one end
$7.50 /each
– NEW strips polished for immediate use
$5.50 /each
– Your used strips (reconditioned) for immediate use
D1275
Copper Strip
$1.50 /each
– Unpolished
$2.50 /each
– pre-polished
D2619
Copper Specimen Standard Test method for Hydrolytic Stability of Hydraulic Fluids
$7.00 /each
– Cut, Deburred and unpolished
ASTM D7671
Standard Test Method for Corrosiveness to Silver by Automotive Spark-Ignition Engine
Fuel-Silver Strip Method (Modified D130 Silver Corrosion Test in D4814
Silver Coupons 18mm X 12.6mm +/- .1mm X 2.75mm
$25.50 /each
– NEW – unpolished silver coupon
$28.00 /each
– NEW polished silver coupon ready for immediate use
$6.25 /each
– Your silver coupon polished (reconditioned) for immediate use
The silver coupons are prepared as specified in ASTM D2671, the new test method that replaces the Modified D130 Silver Corrosion test specified in ASTM D4814 Specification of Motor Gasoline, also packaged in individual envelopes the placed in jars and sealed in an inert atmosphere ready for immediate use. Please note that the price of the silver coupons is dependent on the very volatile silver market and may change as current supplies of silver are depleted.
DIN 51353
$14.50 /each – 20mm wide, 40mm length, 0.5mm thick
ASTM D7667
$4.75 /each – 38mm length (1.5″), 6.0mm wide, .535mm thick
Second option:
$27.75 /each – 304mm strip (12″ length), 6.0mm wide, .535mm thick
D665 or NACE Rust Tests Spindles-
New, polished for immediate use.
Please specify Spindle and Thread when ordering:
$14.50 /each – U.S. Thread
$16.50 /each – Metric Thread
Your used spindles Reconditioned for immediate use:
$7.25 /each
WIRE:
14 Gage SOFT Drawn Copper Wire Rolls:
500 ft. roll
$505.00 per roll
14 Gage SOFT Drawn Copper Wire Rolls:
1000 ft. roll
$800.00 per roll
16 Gage HARD Drawn Steel Wire Rolls:
2000 ft. roll
$275.00 per roll
O-RING GASKET in D2272 and D2112 Methods:
$3.50/each
Minimum order quantities do apply on some products.
**Once a quote has been given there is a 30-day period for that quote item (s) amount to be honored with exception of the estimated shipping cost which fluctuates.
All prices FOB / Tulsa, OK in United States funds. Terms, net 30 days.
* If there is a shipping account number for UPS or FedEx you would like us to use, this needs to be made known when order is placed.
*Orders will be shipped by UPS unless FedEx is requested and agreed on.
*Shipping charges will be prepaid and added to the invoice unless the account number is noted.
*C&P Catalyst, Inc. are not responsible for duties, taxes or any fees that develop in shipping.
**Please list any Vat number or information that could smooth shipping.
*Credit cards are accepted in addition to the purchase order process, please make type of payment known.
*We do require prepayment on certain situations before a shipment can be sent.
*We reserve the right to refuse service if certain situations arise.